skip to Main Content
Chiron 600 by 320

Chiron: DZ08 FX Machining Centre

Chiron’s double-spindle machining centre DZ08 FX has a maximum torque of 7 Nm at a power of 14 kW and reaches a speed of up to 40,000 rpm with a run-up time of 1.9 seconds. The dynamics are demonstrated by an acceleration of 10 m per s2 in the X axis, 17 m per s2 in the Y axis, and 20 m per sq in the Z axis.

A speed of 75 m per min on the X and Y axis and 100 m/min on the Z axis can be reached in rapid traverse. The results are chipto- chip times of 3 seconds and a tool change in about 0.8 seconds.

click here for previous article
click here for next article

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top