Maxim Integrated: Trinamic 3-Phase MOSFET Gate Driver
The fully integrated TMC6140-LA 3-phase MOSFET gate driver simplifies design and maximises the battery life of brushless direct current (DC) motor drives. It integrates all three bottom shunt amplifiers to provide a complete motor drive solution with 30 percent improved power efficiency while simplifying design by reducing the component count by half when compared to similar solutions.
The TMC6140-LA is optimised for performance over a wide voltage range, making it well-suited for servo motors, brushless motors and permanent magnet synchronous motors.
Hybrid Electric Marine Propulsion System
Shaped to externally resemble an aviation jet, through an integrated electric motor it sucks the water from the front and pushes it from the bow side to propel the boat. The energy for the electric motor is supplied by batteries that can be recharged on board by the FPT Industrial N67 570 EVO engine, coupled with a state-of-the-art variable generator, or by the charging station when the boat is in harbour mode.
The new Hybrid Electric system is designed to maximize efficiency, silence, application modularity and flexibility. With the same amount of energy, the DeepSpeed Jet generates more thrust and speed compared to a prop system, while consuming less.
Integrated Electric Axle
Delivering high performance (840 kW), outstanding efficiency and full sustainability, the e-axle for HCVs was jointly developed for the BEV version of the Nikola Tre truck. With a range of up to 560 km (350 miles) and dynamic performance, the Nikola Tre BEV truck will be an important step forward in making zero-emissions transportation possible for heavy-duty commercial trucking. FPT Industrial, IVECO and Nikola have adopted a modular approach in developing their electric offering, which is unique in the industry.
The Nikola Tre platform will be capable of using either battery-electric technology or hydrogen-powered fuel cell technology. With this approach, the partners are taking the long view, bringing both technologies on stream now to pursue BEV and FCEV in their offering in the next few years.
Mencom’s IP68 Enclosures Series
Mencom offers a range of IP68 series rectangular enclosures that provide the highest level of protection against dust and complete continuous submersion in water. These IP68 series enclosures have also successfully passed the tests required for the IPX6 degree of protection (tightness to powerful water jets) and for the IPX9 degree of protection (high pressure and temperature water jets). Therefore, their official overall protection rating is IP66/IP68/IP69.
The IP68 enclosure series is larger than the standard enclosures, providing more space for easier cable management, and the walls are thicker to provide more mechanical robustness.
Mitsubishi Electric’s New Graphic Operation Terminals
Mitsubishi Electric has launched two new additional Graphic Operation Terminals (GOTs) to its GOT SIMPLE Series lineup. The 10-inch and 7-inch widescreen models, which support virtual network computing (VNC), can be used as VNC servers enabling remote access from offices or other remote locations field engineers may find themselves.
This feature will help meet customers’ needs for improved work efficiencies when performing monitoring and maintenance in factories, buildings, utilities and other automation applications.
Mitutoyo America Introduces MCOSMOS Version 5.0
Mitutoyo America Corporation recently announced the release of MCOSMOS Version 5.0, the newest version of their advanced metrology suite for Coordinate Measuring Machines. This software offers support in thirty-seven separate locations and in twelve different languages.
What distinguishes MCOSMOS v.5 from its predecessor are the upgrades to its interface, functions, and performance. Most noticeable from launch is the new and simplified graphical user interface: The updates made to this are not only visually pleasing but also assist in improving the user experience, no matter their level of knowledge working with the tool. These changes include easy-to-use “ribbons” and a much-requested search function, assisting operators in finding specific sections of their measuring process for detailed reports.
PTG HOLROYD Rotor Grinding Machine
The TG range starts with the TG50E, a machine designed to precision grind components of up to 50 mm in diameter and 610 mm in length, with models offering stepped increases in capability up to the production of helical components measuring 450 mm in diameter and 2020 mm in length.
Equally suited to prototyping, batch and volume production, TG Series machines are designed primarily for the finish grinding of helical screw components such as worm screws and rotors after they have been milled to a rough or semi-finished state. TG models offer production rates and accuracies to suit precise manufacturing strategies. Fully automated on-machine probing provides closed-loop feedback of corrections to the dresser wheel and does not require a high level of operator skill.
QuickRobot Online Tool From igus
These robots weld, rivet, palletise and assist. In order for the small and large production to be able to work fail-safe in 24/7 operation, they need the right energy supply system to safely route the cables and hoses from axis 1 to axis 6.
For the simple design of the individual energy chain for cobots, SCARA, 4-axis robots and 6-axis robots, igus has now expanded the capabilities of its robot equipment configurator. In the online tool, users can select their robot from 418 different models from 10 manufacturers and find the optimum energy supply for axes 1 to 6.
Siemens’ Simcenter 3D 2022.1
Siemens Digital Industries Software just announced the latest update to Siemens’ Simcenter™ 3D software, part of Siemens’ Xcelerator portfolio of software and services.
The update enables engineers to tackle the complexity of product development and innovation with advanced simulation, offering new capabilities such as increased support for turbomachinery modelling, a dedicated drop test application for handheld devices, tightly integrated topology optimization with the NX Design environment, and a new acoustic solution method that is up to 10 times faster than standard methods.
WITT Safety Valves For H2 Electrolysers
The WITT safety valves AV 619 and AV 919 perfectly match the target pressure and temperature ranges of PEM and Solid Oxide electrolysers. The opening pressure can be set accurately anywhere in range 5 to 500 mbar. The operating temperature can be anywhere up to 250 deg C. For Alkaline electrolysers, the SV 805 model is ideal, with an opening pressure settable anywhere in the range 0.5 to 45 bar, with operating temperatures up to 150 deg C.
Highly precise and reliable, the valves open when the set pressure is reached and safely protect workers and sensitive equipment from overpressure. Despite their small size, the valves allow high flow rates, making them also suitable for large installations.
What You Missed:
Latest Product Launches From BOGE To Hexagon
5 Sustainability Concepts Driving The Data Center of the Future In Equinix
From Guiding To Self-Driving
Growth In Usage Of Ethanol Fuel in Automotive Industry Presents Opportunities
Google Cloud Launches New Solutions To Help Manufacturers Unify Their Data And Address Industry-Specific Use Cases
ESPRIT Is The Only CAM System You Will Ever Need
A Fully Digital 3D Printed Prosthetic Eye?
India Doubles Down On Coal As Heatwave Worsens Power Crisis
CADS Additive And EMUGE- FRANKEN Jointly Optimise Additive Manufacturing Processes
WANT MORE INSIDER NEWS? SUBSCRIBE TO OUR DIGITAL MAGAZINE NOW!
Do you have an opinion about this story? Do you have some thoughts you’d like to share with our readers? APMEN News would love to hear from you!