skip to Main Content
HSE Feels Not Enough Is Done To Protect Workers From Metalworking Fluids Exposure

Image credit - Daniel Smyth

HSE Feels More Needs To Be Done To Protect Workers From Metalworking Fluids Exposure

Metalworking Fluids Exposure – Health and Safety Executive (HSE)’s inspections revealed more can be done to protect workers from the hazard.

This is a highly technical, specialist field applying precision engineering – but it can also cause harm to the lungs and skin. HSE says more needs to be done to keep workers safe. In a bid to improve knowledge in this area, HSE has created an online quiz as part of the ongoing campaign.

The annual statistics on work-related ill health and workplace injuries for 2022/23 show 12,000 people die annually from lung diseases linked to exposure to hazardous substances at work. In addition, 19,000 new cases of breathing and lung problems are thought to have been caused or worsened by work.

The manufacturing industry has a substantially higher rate than average for occupational asthma.

HSE inspector Fiona McGarry said: “It is clear that not enough is being done to protect workers and keep them safe and healthy. Our inspections found that there are still far too many businesses which do not have key control measures or health surveillance in place. As a result, enforcement action is being taken against these manufacturers. The creation of the quiz is a really easy way for people to test their knowledge about how best they should be protecting workers.”

Exposure to metalworking fluids – also referred to as ‘white water’ – can cause harm to the lungs and unprotected skin. Despite this, many of the firms inspected were not carrying out health checks. Health surveillance is a legal requirement where there is exposure to fluid or mist.

The inspections so far also found poor performance around the control of metalworking fluids in businesses that use computer numerical control (CNC) machines. To protect workers, employers should reduce exposure by putting control measures in place. Local Exhaust Ventilation (LEV) should be fitted on CNC machines to carry away any harmful metalworking fluid mist.

HSE inspector Fiona McGarry, added: “Lung problems and irritated skin don’t have to be associated with working with metalworking fluid if you take the right precautions. It is really important that control measures and fluid quality checks are in place to keep workers healthy. Health checks are essential to identify signs of ill-health early.”

More about the ongoing campaign, and tips on how to keep workers safe, can be found in HSE’s website. HSE will continue to carry out unannounced inspections between now and the end of March 2024.



Related Stories:



Japan Eyes Domestic Underwater Drone Production by 2030
Energy-Efficient Spray Lubrication From technotrans
Baidu’s ChatGPT-Like Ernie Bot Leads The Pack In China
AIDA Engineering Malaysia – Asia’s Leading SME That Drives Sustainable Innovation
High-Pressure Water Jet Cutting Of S235JR Steel Alloy And Influence Of Process Parameters On Dimensional Accuracy
Enhance Fabrication Potential With FACCIN Group’s Cutting-Edge Tube Bending Solutions
HKU Engineering ‘Super Steel’ Team Develops New Ultra Stainless Steel For Hydrogen Production

Discover The Future With AIDA At METALEX Thailand 2023
Analysing Incremental Wire And Tubes Die Bending
WeldCube Provides Full Control With Every Weld




CONNECT WITH US:  LinkedIn, Facebook, Twitter


Letter to the Editor
Do you have an opinion about this story? Do you have some thoughts you’d like to share with our readers? APMEN News would love to hear from you!


Email your letter to the Editorial Team at [email protected]

Japan Eyes Domestic Underwater Drone Production by 2030
wire and Tube 2024 To Set New Standards
Back To Top