fbpx skip to Main Content
OGP: Prosthetic Devices Inspection With ShapeGrabber Scanner

OGP: Prosthetic Devices Inspection With ShapeGrabber Scanner

OGP: Prosthetic Devices Inspection With ShapeGrabber Scanner

Prosthetic Device Manufacturer Relies on ShapeGrabber for Measurement and Inspection

DePuy Orthopaedics, Inc., a Johnson & Johnson company, designs, manufactures and distributes orthopaedic devices and supplies including hip, knee, extremity, trauma, orthobiologics and operating room products.

Components like knee implants are checked with laser scanning, because of the complex sculptured contours required for proper functioning.

As DePuy developed more complex, sculpted medical device components, implants, and prosthetics, it found its measurement capabilities were limited by the low point density and relatively slow speed of traditional touch probe technologies.

Because its devices were being used by human patients, DePuy needed dramatically higher density of point coverage to accurately capture the form and dimensions of these complex shapes, and the ability to compare them directly to CAD designs.

To obtain the high point density necessary for accurate measurements, DePuy selected a ShapeGrabber 3D laser scanning system. The ShapeGrabber solution proved to be faster and more versatile than other laser probe systems that DePuy evaluated, and the ShapeGrabber scanner was able to measure the complex, compound curves of DePuy parts quickly and accurately.

Since choosing the ShapeGrabber system, DePuy has found that it can reconfigure the scanner quickly to accommodate parts of different sizes and can perform the quality assurance inspections it requires to ensure its low volume parts are properly formed and sized.

“For complete inspection of our anatomical implants, we opted for the touchless approach of laser scanning. Our first laser probe system was very slow and had limited function, because it could only acquire one point at a time and could only measure diameters. We moved to a ShapeGrabber 3D laser scanner, a much faster and more versatile alternative,” said Roger Erickson, DePuy Orthopaedics, a Johnson and Johnson subsidiary.

Learn more about the ShapeGrabber here.

For other exclusive news and information, visit www.equipment-news.com.


Check these articles out:

A New World of Laser Tracker Scanning

3D Scanner Market To Experience Double Digit Growth Till 2022

Materialise Acquires ACTech To Expand Manufacturing Solutions For 3D-Printed Metal Parts

Use of Technical Assistance Systems to Boost Efficiency & Cut Costs

RADAN Powers Paradigm Shift To Digitally Focused “Web Shops”

Traceability In The Medical Sector—Technical Challenge

Creaform Launches 3D Scanning Solution Suite for the Aerospace Industry

3D Goes Long-Range With The First Scanning Laser Tracker

Malaysia Airlines Orders 16 Aircraft From Boeing Worth US$1.8B



FOLLOW US ON: LinkedIn, Facebook, Twitter



High-precision Layer Work
Key To Success For Efficient And Cost-effective Product Manufacturing
Back To Top