Product Highlights

Aerotech: AGV-XPO Premier Two-Axis Laser Scan Head The AGV-XPO is a high-dynamic, two-axis laser scan head that combines low-inertia, high-efficiency motors with ultra-high resolution position feedback and optimised structural dynamics to deliver rapid acceleration profiles and excellent part-profile tracking with…

Maxim Integrated: Trinamic 3-Phase MOSFET Gate Driver The fully integrated TMC6140-LA 3-phase MOSFET gate driver simplifies design and maximises the battery life of brushless direct current (DC) motor drives. It integrates all three bottom shunt amplifiers to provide a complete…

ARISTA Introduces Alvista Plus 3 To 1 KVM Switch Extender The model ARD-0301-A00-TX KVM Switch Transmitter connects the HDMI outputs and USB ports of up to three computers as the source signals and then feeds those signals to the model…

FARO Technologies has announced the launch of an unprecedented, ultra-efficient data capture and collaboration platform.

Anycubic has unveiled two new series of printers that will appeal to fans of resin and FDM printers alike.

NORDAC FLEX Frequency Inverters From NORD DRIVESYSTEMS The large power range, up to 22 kW, is characteristic for the frequency inverter. In addition, the NORDAC FLEX SK 205E is compact and enables high precision in synchronous and positioning applications via…

ElectroCraft Releases NEMA23 Frame Size ElectroCraft, the global fractional horsepower motor and motion solutions provider, has released a NEMA23 frame size to add to the ElectroCraft AxialPower™ Enhanced Series Stepper Linear Actuator product line. ElectroCraft enhanced series linear actuators have…

Amazon Web Services (AWS) has announced AWS IoT TwinMaker, a new service that makes it faster and easier for developers to create digital twins of real-world systems like buildings, factories, industrial equipment, and production lines. Digital twins are virtual representations…

The Tepex continuous-fibre-reinforced thermoplastic composites from Lanxess are also ideal for the production of structural components that form part of driver assistance systems. One such example is a bracket for a battery that supplies electricity to the highly automated driver…

Now available in the UK from the Engineering Technology Group (ETG), the new 715 Series mill/turn centre from the Chiron Group demonstrates its autonomous machining capabilities by machining components on all six sides.

4D Technology, a subsidiary of Onto Innovation at the forefront of vibration-immune, instantaneous 3D measurements of surfaces, has announced an alliance with Rizse, a developer of specialized drones for aircraft inspection. Together, the two organizations will seek to develop an…

Evolve has developed an additive technology that speeds up the build process without high unit costs. Contributing to the speed and cost efficiencies of its SVP (scalable volume production) platform is motion control equipment from B&R. This equipment integrates motion…

Hot Problem… Omni Mold was approached by their customer to address the issue of inefficient cooling in one of the mould core insert. The existing mould uses a conventional cooling design with a spiral-shaped core insert. The cooling was uneven…

LVD At Blechexpo 2021: High-Power Laser Machine And More! The powerful 20 kW Phoenix FL-3015 provides laser cutting productivity and processes efficiently a wide range of ferrous and non-ferrous materials and material thicknesses up to 40 mm. Equipped with LVD’s…

ABB Ability™ Genix Datalyzer ABB’s Datalyzer is designed to help customers respond to this challenge. The comprehensive, cloud-based modular application provides real-time status across a fleet of analyzers and plants. In doing so, it lowers ownership costs and reduces capital…

New solution allows OEMs to troubleshoot equipment from anywhere and reduce customer downtime

Customers can take advantage of this substantial trade-in offer to replace existing used forklifts with new dependable, high quality Crown equipment at a considerable savings. AUCKLAND, New Zealand, September 28, 2021 — Crown Equipment, one of the world’s largest material…

Kristianstads Lyftdon AB in Sweden has long experience of producing ergonomic solutions for the operator cabins from which you control cranes and industrial operations. With the help of HMS Anybus technology, their new joystick can be used in industrial applications…

Known as NUMcad, the new drawing software runs directly from the machine’s operator panel and also under Windows on any standard PC. Its user interface mimics that of many popular CAD packages and is highly intuitive, making it ideal for…

Finding a compatible linear module for your application is certainly a difficult task. Lead screw, gear rack or toothed belt drive? Miniature or heavy-load axle? Motor or hand wheel? There are multiple configurations that one needs to consider before ordering…

Hitachi High-Tech Analytical Science has further expanded its metals analysis range with the launch of the OE720. A year ago, the reveal of the ground-breaking Hitachi OE750 caused waves in the industry by making high-performance metals analysis finally accessible to…

Creaform has announced the latest addition to its HandySCAN 3D line-up offer, the SILVER series. Developed and manufactured in North America, the SILVER Series captures highly accurate and repeatable 3D measurements of any complex surface in any location. It represents…

MAPAL is launching a new, particularly economical system of replaceable head reamers – the Press-to-Size-Reamer (PSR) – for customers who manufacture in large series. Thanks to the new development, the costs per bore are reduced massively. The solid carbide replaceable…

AMADA WELD TECH, INC. has released the CD-A1000A, a 1000 watt-second advanced capacitive discharge welder, ideal for battery tab welding, honeycomb tacking, and welding of conductive terminals. This next generation CD welder is the latest in a long line of…

Siemens Digital Industries Software has announced the availability of the latest release of Simcenter 3D software, part of the Simcenter portfolio of simulation and test solutions. Simcenter 3D and the Simcenter portfolio are part of the Xcelerator portfolio, Siemens’ integrated portfolio…

DP Technology, a leading developer of computer-aided manufacturing (CAM) software, announces a new update to their popular New ESPRIT series. The New ESPRIT 4.6 includes features such as turning toolpath enhancements, support for contour-type features in pocketing, and automatic tool…

LVD introduces Ulti-Form, a new robotic bending system featuring an automated tool changing press brake. Ulti-Form follows the success of LVD’s Dyna-Cell robotic bending cell and takes automated bending technology a step further by incorporating an automated tool changing press…

Hypertherm has released the extreme bevel consumables for its MAXPRO200 LongLife air and oxygen plasma cutting system.  The consumables, designed for mechanized, robotic, and handheld cutting, have an aggressive pointed geometry so the plasma torch can tilt to an angle…

Hexagon’s Manufacturing Intelligence division has released a new multisensor coordinate measuring machine (CMM) that facilitates smart manufacturing by providing a cost-effective entry point into automated measurement. Fully compatible with a range of Hexagon smart technologies, the OPTIV Lite 3.2.2 is designed to…

AMADA WELD TECH has launched its Jupiter series of modular systems for precision joining, available for laser welding, laser marking, resistance welding, micro arc welding, and hot bar bonding applications. Jupiter modular systems can be equipped with all joining process…

Basler AG is launching seven additional interface cards with GigE Vision interface under its own brand name, which will significantly expand the existing portfolio. The interface cards with 1GigE, 1GigE PoE (Power over Ethernet), and 10GigE have one to four…

LVD launches Taurus FL, a new large-format gantry-style fiber laser cutting machine engineered for extra-large sheet metal cutting capacity. A unique modular design, the machine size begins at a 12-meter bed length and can be expanded in increments of 2…

Selective Laser Melting pioneer SLM Solutions officially introduces its new SLM machine NXG XII 600, which is now available for commercial offer. The highly anticipated machine is equipped with 12 lasers with 1 KW each and a square build envelope…

LVD YSD LaserONE is a new cost-effective laser cutting machine designed to put the advantages of fiber laser technology within easy reach of sheet metal fabricators by eliminating the extras that increase machine cost and complexity. LaserONE is offered with…

Paul Horn GmbH is expanding its range of gear cutting products. Horn’s new tool system for milling bevel gear teeth allows the complete machining of bevel gears on universal turn-mill centres. The system was created in cooperation with machine manufacturer…

Like all manufactured parts, cutting tools require technical drawings to make a design a reality. Best practice for cutting tool manufacturers emphasises the importance of a tool drawing that is detailed, clear and precise. Tool drawings are essential for many…

API presents the new and improved vProbe in online demos. vProbe achieves CMM-level accuracy when measuring components of any volume. API’s new vProbe is smaller and lighter. It features automatic probe recognition, smart buttons, and has a working battery life…

Doosan Machine Tools Co., Ltd will release more DMB Series line-ups, a double column of 2,000mm and 3,000 effective width, which consists of the multi-purpose double column machining center that is suitable for machining both large size workpieces and moulds.…

With “Walter Innotime”, Walter is introducing the world’s first digital design wizard for accelerating the consulting and ordering process. Engineers in Walter Engineering are working with a new digital wizard: Walter Innotime. This web application links existing Walter systems to…

LVD Company nv introduces the Strippit PL Punch-Laser combination, a machine that combines the punching and forming advantages of the Strippit PX or V Series punch press with the speed and versatility of fiber laser cutting to complete multiple processes…

Kennametal has expanded its replaceable drill offering for KenTIP FS modular drill series with the new FEG insert for flat bottom hole applications. Applicable in steel, cast iron, and stainless steels, the FEG insert eliminates end milling operations and completes…

A new clamshell style, O.D. mounted split frame machine that features fast, accurate, and easy to setup indexable tooling to part and bevel tube and pipe from 51 mm TO 1220 mm dia. is being introduced by ESCO Tool of…

Vibration free HUSH-BORE boring bars are cylindrical shank type products, with no flat parts, for deep internal turning operations in 7xBD to 10xBD (BD: shank diameter) range. Therefore, based on the flat surface design of the head, set-up time can…

The new “Hoffmann Group Connected Tools (HCT)” product family Hoffmann Group is driving digitalisation forwards in the field of tooling. The range includes Bluetooth-capable tools which at the push of a button send measured values directly to a PC application…

OMAX Corp will showcase their extensive product line at EuroBLECH 2021. EuroBlech 2020 has been rescheduled to March 9th-12th 2021. Included in this year’s line up the ProtoMAX and OMAX 55100. Visitors to the OMAX booth (Hall 12 / Stand…

Kennametal has introduced a new line of digital-ready fine boring tools that make precision adjustment easy, enabling more productive, predictable, and accurate boring. The eBore Fine Boring System consists of cutting units to cover a diameter range from 6 to…

Tungaloy has announced that its TungMeister series of exchangeable-head end milling system now includes long-flute end milling heads and new high-rigidity shank holders. With TungMeister, significant reduction in tool changeover time can be achieved through the ability to replace used…

Kennametal has introduced its newest turning grade, KCS10B, for nickel, cobalt and iron-based superalloys used in aerospace and other high temperature applications. KCS10B, which features a revolutionary coating applied to an ultra-fine grain carbide substrate for superior layer adhesion, delivers…

With the X·treme Evo solid carbide drills from the DC160 Advance range of drills, Walter is forging a link to the “next generation of drilling”. By introducing lengths of 16 to 30 × D, the tool manufacturer its expanding its…

Walter Tools is completing its D4120 product range. With dimensions of 2, 3, 4 and 5 × D, the Tübingen-based company offers a wide range spanning diameters from 13.5 to 59 mm. Specially developed outer and centre inserts ensure precise…

A brand-new gear grinding centre from Holroyd Precision promises to bring higher levels of intelligence and efficiency to the production of specialised gears and tooth forms. Called the GT350, this latest machine from the Precision Technologies Group (PTG) company has…

Powerful pallet change module with comprehensive monitoring options Following the successes of its high-performance pneumatic SCHUNK VERO-S series quick-change pallet systems, SCHUNK has launched a hydraulic clamping module for machines with pallet changer that combines compact dimensions, high pull-down forces,…

Creaform has released its latest version of the MetraSCAN 3D lineup, the company’s advanced optical CMM scanner designed specifically to perform metrology-grade 3D measurements and inspections. As the fastest and most accurate portable optical CMM scanner, the MetraSCAN BLACK can…

A raft of new and enhanced functionality features in VISI 2021 – the latest release of Hexagon’s specialist mould and die CAD/CAM software. CAD: CAD analysis benefits from a new function which improves the suite of analysis shading modes. Draft Analysis has…

FARO Technologies, Inc. has released its most affordable and accurate 3D portable coordinate measurement machine (CMM): The FARO Gage. Ideal for small and medium-sized businesses performing high-accuracy tasks, the Gage is the most intuitive, ergonomic, and versatile articulated portable FaroArm,…

LVD introduces MOVit, a comprehensive range of automation systems, including new TAS (Tower Automation System) and WAS (Warehouse Automation System) options for LVD Phoenix and Electra laser cutting machines. MOVit systems also include LVD’s Compact Tower (CT-L), Flexible Automation (FA-L)…

Getac has unveiled its B360 fully rugged laptop, setting a powerful new benchmark for innovation in the rugged computing industry. Fully engineered for 5G, the B360 features best-in-class computing speed, brightness, and rugged reliability, resulting in a highly advanced mobile…

OMRON Automation has released its new CP2E Series all-in-one controller that provides advanced control enabling IIoT connectivity for compact machines. The controller improves manufacturing productivity and quality by making it easy to visualise the performance and data of connected machines…

Hexagon’s Manufacturing Intelligence division has launched new high-quality chucks to enhance the measurement of cylindrical and rotationally symmetrical parts, one of the most common tasks undertaken on coordinate measuring machines (CMMs). Hexagon’s Swift-Fix Chucks are designed to hold pieces in place with…

Hypertherm has released ProNest 2021, a major version update of its advanced CAD/CAM nesting software for automated cutting. This new release contains new features and enhancements designed to make customers more efficient and profitable. These features include: Redesigned 2D CAD…

Tungaloy is expanding its TungTurn-Jet series of turning toolholders by adding 10×12 mm shank designed specifically for the use on Swiss-type lathes enabling high-pressure coolant supply through the toolholder directly from the machine without an external coolant hose connection. TungTurn-Jet…

Walter TC470 Supreme thread former with HiPIMS coating. With the TC470 Supreme, Walter is introducing a thread former especially for the requirements of series manufacturers – longer tool life, higher productivity and better process reliability. Its geometry has more forming…

ANCA’s new CIM3D V9 release of the industry-leading CIMulator3D software has an upgraded interface with fresh colours and icons and is even easier to use with intuitive functionality. The latest technology and software design has been packed into this release…

Trumpf has released its first automated arc welding system. The TruArc Weld 1000 comes with a collaborative robot known as a “cobot”. After the operator has manually guided it over a component, the cobot then automatically carries out the weld.…

ISCAR is upgrading the ISCARMILL F75 family of 75 deg indexable face milling cutters, which carry single-sided square inserts SP , by introducing new milling cutters that are intended for mounting the same inserts The new cutters, designated as F75…-M,…

Hypertherm, a U.S. based manufacturer of industrial cutting systems and software, has announced a new version update to Robotmaster V7, its CAD/CAM based offline robot programming software. This new release contains targeted features and enhancements designed to make customers more efficient and…

Tungaloy is expanding DuoJust-Cut line of indexable parting tools to include JXPS inserts that features a pressed-in 3D chipbreaker for reliable chip control in during parting operations on Swiss-type lathes. DuoJust-Cut features innovative insert clamping ensuring tool rigidity and stability…

KASTO Maschinenbau has equipped its UNITOWER storage system with a practical new feature. The automatic bar stock and sheet metal storage system is available with an integrated pick-by-light function. Using this solution, the operator is intuitively guided to the required…

Users of Renishaw’s XM-60 multi-axis calibrator can now benefit from a new single-axis horizontal stage. This enables precise alignment in applications without an axis perpendicular to the travel. Precision translation of the XM-60 launch unit is easily achieved with the horizontal stage,…

With Accure·tec, Walter provides a damping system specially for turning and milling using tools with a long projection length. The vibration damping provided by the axially and radially flexibly positioned damper element is preset at the factory. The tools can…

Seco Tools has introduced a modular toolholder system for manufacturers seeking to improve their productivity with Swiss-style machining. The system enables fast, easy and repeatable insert indexing and tool changes outside of tight machine work envelopes. The QC Toolholders also…

For some time the market has been demanding that machine tools must be “more flexible”, “universal” and “automated”. The equally important requirements of “more specialised” and “more cost-effective” often cannot be reconciled with these demands. However, this is exactly what…

For some time the market has been demanding that machine tools must be “more flexible”, “universal” and “automated”. The equally important requirements of “more specialised” and “more cost-effective” often cannot be reconciled with these demands. However, this is exactly what…

Walter is launching a new system specially designed for grooving along a shoulder with the G3051-P groove turning holder and the new MX22-2L/R indexable inserts. An insert installation position inclined by 3 deg and new grooving inserts with a level…

Walter is introducing three new high-feed milling cutters: The Xtra·tec XT M5008 high-feed milling cutter for diameters of 16–66 mm (⅝–2½”), and the two MC025 Advance and MD025 Supreme solid carbide milling cutters for diameters of 1–25 mm (⅛–1″), with…

The tap holder EMUGE Softsynchro SnapLock allows a quick and keyless change of the threading tool directly in the machining centre without removing the holder. Ideal for limited magazine space and frequent tool changes. Pressing the locking button releases the…

Sandvik Coromant has introduced a new collet for its CoroChuck 930 high-precision hydraulic chuck. Designed to suit Weldon shanks, the new collet features a mechanical locking interface to prevent tool pull-out or movement when producing expensive components and/or machining with…

Seco 335.18 And 335.19 Cutters Enable Smooth, Problem-Free Disc Milling when performing disc milling operations in hard-to-machine materials, Seco Tools.

Paul Horn GmbH presents the Boehlerit 3D milling system expansion for the tool and mould making industry. The ISO 00P, RHOMBItec, BALLtec and TORROtec systems cover all relevant machining operations for the 3D milling market segment. The ISO 00P is…

Taking ER Farther Kennametal has announced an expansion of the turret adapted clamping units (TACU): ERready driven units in conjunction with a line of solid ER collets which are threaded to accept screwon milling cutters.

For aerospace shops struggling with holemaking and milling operations in hybrid stacked materials, the new JC899 Hybrid Stack finisher and JC898 rougher from Seco Tools are ideal solutions. The finisher, JC899, features a patented two-in-one geometry that eliminates problems with…

Kennametal introduces it latest innovation in hard turning-KBH10B and KBH20B PcBN grades, double-sided inserts for materials up to 65 HRC. The new grades are specially designed to deliver higher productivity and longer tool life when turning tool steels and other…

Kennametal has released the KOR 5 solid carbide end mill—its latest innovation in high-velocity aluminum roughing. Designed for maximum productivity in aerospace machining, with this five-flute end mill table feed rates increase up to 66 percent compared to commonly used…

Walter Enables Automatic Detection For correct pre-positioning of tools and blanks prior to machining, WALTER now offers a new TOOL VISION SYSTEM for all its tool grinding / eroding machines with robot loader.

During drilling from solid in steel, the focus is on quality, time and cost-effectiveness. And these topics are therefore also in the foreground during the development of new tools. Along with the Tritan-Drill Steel, which is the tool of choice…

Kennametal announced the latest addition to its best-selling HARVI line of high-performance solid end milling tools, the HARVI I TE four-flute solid carbide end mill. With a radical new design, the HARVI I TE delivers outstanding performance in a broad…

MVTec Software GmbH will release HALCON 19.11, the latest version of its standard software HALCON, on November 15. The release will include many new and improved functions that advance the level of machine vision technology available to OEMs, integrators, and…

Under the product name OptiMill-3D, MAPAL is announcing a new high-performance programme of solid carbide milling cutters specially developed for tool and mould making. Along with extremely heat-resistant coatings and special carbide substrates, these tools are characterised in particular by…

Seco Tools Releases New Duratomic TM Grades for Stainless Steel Turning Seco Tools has announced the release of three new grades specifically for stainless steel turning featuring the company’s latest Duratomic generation and its Used-Edge Detection technology.

Tungaloy is expanding its TetraMini-Cut, an indexable thread turning tool series with four edged insert, to include full profile threading inserts for machining external threads in ISO metric thread standards.

Iscar: F3S Chipformer For Finish Turning On Superalloys And Exotic Materials Intended mainly for aerospace industries as well as for the oil & gas market, the new efficient chip breaker for finishing operations is designed for working with unique and tough to machine nickel based alloys (Inconel, Waspaloy, etc.), as well as other exotic materials such as titanium based alloys.

Producing threads in hardened steel is costly. This applies to blind hole machining in particular because reversing the tap during this process can cause torque peaks when the root of the chip is sheared off, resulting in fractures. Stability Across A Broad Spectrum

LP-XQ Control By EWM: User-Friendly And Convenient EWM has expanded the LP-XQ control for the Titan XQ puls MIG/MAG multi-process welding machine with additional features, making the welder’s job much easier.

NUM has launched an innovative accelerometer-based active vibration control system for CNC machine tools. Primarily designed to improve machining by virtually eliminating tool head vibration, the system further helps increase productivity by maximising material removal rate (MRR) and can also provide valuable real-time feedback for predictive maintenance purposes.

At the EMO 2019 Agathon will highlight new developments in the field of machinery and services, as well as solutions and innovations for guiding, centering and quick-change, especially for tool and mould making. Agathon will be presenting its broad portfolio…

Vibration often occurs during machining. This leads to dynamic instability of the system. Inadequate surface finishes, insufficient accuracy, high machining noises, shortened tool lives and, in extreme cases, broken tools and cutting edges can be the result. In order to…

With the Xpert Pro, Bystronic presents a high-end press brake that sheet metal processing companies can adapt to their requirements on a modular basis. The new model in the Xpert series of machines meets the highest demands in terms of…

Hexagon’s Manufacturing Intelligence division has launched its scanner for automated inspection: the APODIUS Absolute Camera AAC, a camera-based sensor designed for the fine analysis of large numbers of small repetitive features such as the drill-hole formations often found in large…

Tungaloy enhances its ISO positive turning inserts in “-01” geometry to include a 0.4 mm (.0157″) nose radius prepared in a minus tolerance specifically for precision finishing in Swiss turning applications. The new -01 geometry is designed to deliver consistent…

Tungaloy’s New NDL Geometry Makes Deep Holes Easier To Drill

Threading With Maximum Productivity And Process Reliability Walter AG is releasing the new TC620 Supreme thread milling cutter in diameters up to M20.

Tungaloy Boosts Deep Hole Drilling Productivity diverse deep hole drilling needs of automotive and mould set parts for maximum efficiency and stability.

Schunk has extended its modular system for workpiece direct clamping with the release of the manually actuated series VERO-S WDM-5X. Enabling a defined clamping situation, reliable simulation and collision-free, highly efficient machining of five sides by means of basic and…

Blum-Novotest has launched FormControl V5, its latest measurement software that features new functions FormControl Automation and Alignment Function 2.0. This provides two valuable options for automating manufacturing processes in tool and mould making, the aerospace industry, medical technology and large-scale…

Studer’s S31 grinding machine performs complex and varied grinding tasks precisely and reliably, and can be used to produce small to medium-sized workpieces with a distance between centres of 400, 650, 1,000 and 1,600mm and a centre height of 175mm…

Hexagon Manufacturing Intelligence’s Production Software business has enhanced the post-processed simulation, automation, and five-axis functionality of its ALPHACAM CAD/CAM software. The Post-processor engine now directly configures and deploys a simulation session, resulting in more realistic motion, as well as the…

TaeguTec has expanded its ChaseMill Power inserts portfolio with the introduction of the 2PKT 07 insert and related cutters. TaeguTec’s 2PKT 07 insert is a true 90 deg milling line with two cutting edges, and is characterised by a low…

Walter AG has expanded its range of threading tools with the release of the TC410 Advance HSS-E thread former with TiN coating and a new geometry, which can be used universally for blind and through-hole threads (metric, metric fine, UNC/UNF…

Schunk GmbH & Co. KG has released a pneumatically actuated robot quick-change system that allows fast and process-reliable changing of different gripping systems and tools at the front end. With its four optional module attachment surfaces, the SCHUNK SWS-046 offers…

Using additive manufacturing (AM), Sandvik Coromant Uses AM To Create Lightweight Milling Cutter CoroMill 390, a lightweight milling cutter that helps minimise vibration and improve security during machining with long overhang.

The S31 performs complex and varied grinding tasks precisely and reliably. It can be used to produce small to medium-sized workpieces with a distance between centers of 400, 650, 1000 and 1600 mm and a center height of 175 mm in individual, small batch and high-volume production.

The latest addition to the LinX range continues to support demanding automation applications whilst increasing efficiency in a compact footprint. The LinX M-series linear motor features an integrated position sensor with 10 um of resolution, eliminating the need of an…

MVTec Software GmbH, the leading provider of modern machine vision software, announces that May 31, 2019 will be the release date of the new version 19.05 of its standard software, HALCON. This release will further improve machine vision processes with…

For the high requirements in the automotive sector in particular, Walter AG is introducing new boring tools with tangentially arranged indexable inserts. The usually high feeds for tangential systems are therefore transferred from the milling to the holemaking. In contrast…

Tungaloy is expanding its solid carbide thread milling tools in the SolidThread family to include new lines enhancing aerospace machining center applications. The new lines include the MTECS series with the aerospace UNJ and MJ internal thread profiles. Tungaloy is…

Behringer has extended their 3D sawing capabilities by transferring proven concepts to the HBE series to cover all actual additive manufacturing cutting applications. With the newly available models of the HBE 3D series, all common printing plate dimensions can be…

Many versions of heat exchangers are used in different industries. After all, they help to make heat generated usable for other processes. In the case of recuperators, two liquid or gaseous media with different temperatures are pumped into separate circuits.…

Hypertherm is shipping consumable kits for its XPR X-Definition Plasma systems. These new consumable starter kits are available with or without a torch for mild steel and non-ferrous cutting applications. The kits include a variety of consumables to allow for cutting at different amperages, using all of the gas process types supported by the XPR170 and XPR300 systems.

With Walter Cut MX, Walter AG brought a grooving system to the market which used proven methods while overcoming the disadvantages of existing competitor systems: With dowel pin location to counter handling errors for a high degree of change and…

LVD Company nv introduces new automation offerings for its Phoenix FL‑4020 and Phoenix FL‑6020 large-format fiber laser cutting machines, including options for an automated load/unload system and a range of Compact Tower (CT-L) solutions for the Phoenix FL‑4020. The flexible automation systems…

Hypertherm, a U.S. based manufacturer of industrial cutting systems and software, is introducing three new torch sleeves for XPR plasma cutting torches and lead sets. The sleeves allow the torch and lead sets to remain axially fixed while the torch…

Traditional methods are based upon electronic probes that touch the part to measure the outside diameter, which is the dimension that must be accurately gauged.

ABB’s new digital switchgear, the ABB Ability air-insulated switchgear (AIS) for medium-voltage (MV) or UniSec Digital builds upon the company’s MV AIS technologies to enable safe, flexible and smart electrical networks that can deliver power reliably and efficiently and provides an added function of serving secondary power distribution needs as well.

With the X·treme Evo solid carbide drill from the Advance product range, Walter AG is launching the new DC160 product type. Walter AG is releasing an all-rounder for every material, machine and drilling application. This can be used universally in…

Paul Horn GmbH presents the new 32T system for grooving and parting off on Swiss-type lathes and smaller fixed-head lathes.

In order to prevent freezing of the energy supply, such as on inclined lifts, igus has developed a new e-chain called the “ice-chain”.

Marposs’ Provaset T3 is the ideal leak tester for all industrial production sectors and quality labs.

Keysight has announced the launch of KeysightCare, a new service model that offers design and test engineers dedicated, proactive support for instruments, software, and solutions.

Garant’s Parabolic Performance Cutting (PPC) represents a further development of ball-nosed slot drilling and is used above all in machine tool building, toolmaking and die making.

Keysight Technologies’ N4391B optical modulation analyser is the most compact OMA solution of its class and combines industry-leading noise performance with a proven architecture and Keysight’s well-known, reliable and flexible vector signal analysis (VSA) software.

MVTec Software GmbH has launched the new version 18.11 of its standard software Halcon. It offers new and expanded options for embedded vision as well as updated USB3 Vision interfaces. In addition, core technologies will be further improved.

MAPAL’s radical ISO indexable inserts have been developed with the idea of withstanding specialised applications including huge stock removals, unstable conditions or as disc milling cutters.

Behringer’s HBE1060A Performance covers a wide range of applications such as in steel distribution, machine building, tool making and process reliability during sawing.

Sodick’s CNC High Speed Vertical Machining Centres (VMCs) feature linear motor drives on the X, Y and Z axes. They’re designed and engineered for prime speed exactitude edge and have unmatched accuracy.

Autodesk’s FeatureCAM 2019 is designed so that instead of having to program a machine stage by stage, the operator can program it using everyday shop terms, such as ‘turn’, ‘bore’, ‘bolt’, etc. The software is said to have sufficient intelligence to recognize needs and requirements from such terms and will automatically adopt the right speed and torque strengths without having to be instructed line by line.

Arno’s Solid carbide endmill cutters AFV are equipped with uneven pitch design from 35 to 38ﹾ (four cutting edges) and even pitch design with 45 (six cutting edges), for roughing and finishing of nearly all materials (steel, stainless steel, cast, heat resistant alloys and titanium alloys) with up to 60 percent higher feed rate, less vibration, better surface finish and increased cutting depth.

Seco Tools now offers Secomax CS300 ceramic inserts and cutter bodies to boost productivity in milling and turning operations with heavy interrupted cuts on nickel-based, heat-resistant superalloys.

ABB Robotics’ FlexLoader FP 300 and SC 3000 machine tool tending cells each feature a six-axis robot customized to the reach and payload requirements of specific applications.

The 8-Axis FaroArm System is a complete rotational axis identical to and a natural extension of all FaroArm products. It plugs directly into the FaroArm and results in a seamlessly integrated, high accuracy additional axis that requires no additional setup time or effort.

Mencom’s 1 1/8” MIN size III series circular connector has been redesigned to deliver better connectivity and stability in harsh factory environments. The coupling nut has been enlarged, which not only makes the installation process easier by giving a wider knurl area for better gripping, but also provides a more stable connection.

Ecoclean GmbH’s solvent-based large-chamber cleaning system EcoCduty is designed for loads measuring up to 1250 x 840 x 970 mm and weighing up to 1 tonne. It uses hydrocarbons or polar solvents and operates under full vacuum.

Haimer’s VIO linear offers a complete solution for fully automatic high-end tool presetting with customisable options. The modular concept makes it possible to preset tools up to 1,000 mm in length and diameter.

Hypertherm has released ProNest 2019, a major version update of its advanced CAD/CAM nesting software for automated cutting.

Kasto’s Kastotec high-performance carbide metal machine has shorter cutting times and higher saw blade service lives are possible thanks to a steel mineral casting compound, guaranteeing a high degree of damping and quiet running, even with difficult-to-machine materials such as titanium, Hastelloy and Inconel. Standard pre-tensioned linear guides, each with two grease-lubricated guide carriages, extend the working life.

Igus has developed the lokchain energy chain with extending and retracting pins for brand new machine style ideas. The goal of the new lokchain energy offer system is to mechanically increase the operational responsibility.

Trumpf’s TruPunch a thousand processes sheet thicknesses of up to 0.25 in with up to 600 strokes per minute. The proprietary Delta Drive takes away the necessity for the sheet and support table to maneuver within the Y axis as…

Hexagon’s Leica Absolute Tracker AT960 is the first fully portable dynamic six degrees of freedom (6DoF) laser measurement system, that represents a single-unit solution for 6DoF reflector, probe and non-contact scanner measurement, as well as 7DoF real-time machine-controlled inspection.

O-INSPECT measuring machines unite optical and contact measuring technology in a single system, thus covering a large range of parts and comprehensive analysis options. Instead of various special devices, O-INSPECT is all you need.

Heidenhain’s sealed linear encoders from are protected from dust, chips and splash fluids and are ideal for operation on machine tools. Its accuracy grades are as fine as ± 2 μm with measuring steps as fine as 0.001 μm. Installation…

Kennametal’s Narrow Slotting (KNS) cutter, with which automakers can separate cast exhaust manifolds and steering components. Equipment manufacturers can cost-effectively mill the clamping slots on shaft supports and stock collars. Power generation and electronics companies now have a more productive…

Universal Robots’s new e-Series cobot platform includes technology advances that enable faster development for a wider variety of applications. Improvements include the ability to economically address even more applications, thanks to greater precision and sensitivity provided by a built-in, tool-centric…

Fluke Process Instruments has launched a new line of thermal imagers. The thermal and visible light camera enables 24/7 process monitoring with automatic alarms for overheating or defined irregularities. Developed to meet today’s demanding industrial automation requirements, they support GigE…

CNC Software, Inc. has released Mastercam 2019, which was developed to streamline the manufacturing process from job setup to job completion. It increases machining productivity and reduces overall production costs with new 2D through multiaxis milling automation features, CAD and…

Seco Tools has expanded its popular family of T4-12 helical milling cutters to include five new cutters for economical and versatile roughing and semi-finishing operations. The addition of three metric and two imperial sizes makes Seco’s range of long-reach, replaceable-end…

transfluid’s DB 40220-3A-CNC ‘t bend’ tube bending machine has replaced the need to weld bends onto large tubes a long time ago, as it lowers the production costs. In addition to that, the bending systems save up to 60 percent…

Designed for “High Mix – Low Volume” manufacturing, Hwacheon: D2-5AX – 5-Axis Vertical Machining Centre Centre is available from 4+1 to full 5-axis, plus four different spindles are available for selection catering to many different application requirements and materials. It is well-designed for automated production with either Robot or Automated Workpiece Changer system.

Hermle C 52 U Five-Axis Machining Centre with HIMS provides diverse applications for full processing and finishing work with required degree of precision.

The enhanced laser source offers highly efficient machining results for commercially available diamond cutting materials such as CBN, PKD, CVD-D and now also MKD.  Thanks to this further development, PKD materials can be machined up to 2.5 times faster and…

600UK’s Clausing MillPWR CNC milling machine comes fitted with the Heidenhain Acu-Rite control system that offers flexibility and user-friendliness. It allows the creation and programming of complex parts to happen within minutes and can also manufacture one-offs and small batch…

Creaform’s portable optical CMM 3D scanner, the MetraSCAN 3D helps operators better manage processes and respond faster to the industry’s increasing quality control (QC) requirements—all without compromising the manufacturing throughput. Optical metrology provides measurement accuracy that is insensitive to the…

Walter Ewag Helitronic Vision 400 L tool grinding machine high-performance tool grinding machine is designed for machining rotationally symmetrical precision tools such as hob cutters, step drills and profile tools made of HM, HSS, ceramic, cermet and CBN.

Mapal’s hydraulic chuck incorporates a High Torque Chuck (HTC) technology with lean contour with the 3 deg back taper known from the shrink chuck.

Tornos has launched a new range of SwissDeco machines, the SwissDeco 26 And SwissDeco 36. Designed to tackle demanding tasks in any application field, they contain identical main and back machining operations and feature liquid cooling. Its bar diameter stretching…

transfluid’s t-bend DB2060-CNC is a precise engine manifold with two blade cutting, that effectively combines cutting, bending, and shaping. A significantly cleaner cut is ensured where two blades are used for cutting. This has the advantage that no deformation occurs…

Schneeberger’s Minislide miniature tables MS 4 and 5, and MSQ 7, 9, 12 and 15 are characterised by a four track design. Compact and precise for maximum productivity, these miniature guideways provide a high level of smoothness. The guideways are…

Studer launched the favorit, a CNC universal cylindrical grinding machine with a 1,600 mm centre distance for long workpieces, and the capacity for single part and series production fitted with automation. Visible grinding process is possible with full enclosure. It…

Seco Tools’ Jetstream Tooling threading turning holders deliver a concentrated high-pressure jet of coolant —up to 150 bar/2,175 psi or hose connections for up to 275 bar/3,988 psi coolant inlets—to the optimum position close to the cutting edge making it possible to guide or steer chips a certain direction away from the cut.

Renishaw’s SFP2, a surface finish measurement probe designed for use with the REVO 5-axis measurement system on coordinate measuring machines (CMMs), increases the REVO system’s surface finish measurement ability. The REVO system offers a multi-sensor capability with touch trigger, high…

Kennametal released the KBH10—an uncoated polycrystalline cubic boron nitride (PcBN) turning insert offering wear resistance needed to turn hardened metals up to 65 Rc and low cutting force, increasing tool life.

Arno Werkzeuge is expanding its product range with through tool coolant holders integrated with precise coolants straight to the cutting edge.

Friggi’s ONL 850 HSS high-speed carbide bandsaw machine brings bandsawing to within cutting rates of large disc saws.  The use of high-efficiency DC motors and large ballscrew feed, along with highly robust build combined with blade rotational speeds of up to 300 meters per minute ensures extreme cutting rates.

Haimer’s Safe-Lock pull out protection system ensures safe cutting tool clamping. Special drive keys in the tool holder perfectly match the spiral shaped grooves on the cutting tool shank, thus creating frictional clamping forces and a positive locking form-fit.

Faro CAM2 2018 software platform enables users to realise the high-level performance with all Faro metrology products across industries, leveraging the full range of hardware features and functionality—through updates for the latest software and patches. It is supported by the…

Ametek Lloyd Instruments’ new LD series of twin column materials testers has five models with capacities ranging from five to 100 kN, featuring extra-large working area of 452 mm; crosshead travel up to 1070 mm extendable to 1669 mm, and wide speed range. Mounted above a floor-standing compression cage, simple change of grips enables modular machines to suit testing needs.

Yaskawa Motoman’s six-axis HC10 cobot works safely with or near humans by stopping in the event of contact with an operator.

WPV10 and WPV20 are the latest insert grades that Walter USA has introduced to its Perform line of turning tools.

Tungaloy has successfully designed the insert of its TungForce Rec line of end mills with a “V” bottom that fits into a mating “V” bottom pocket on the tool.

Sumitomo Electrical Carbide AC8000P have made available a series of three grades for steel turning to meet a range of application requirements. They feature an Absotech platinum Chemical Vapour Deposition coating for longer tool life and an overall cost reduction in steel cutting.

The MR-J4-GF servo amplifier by Mitsubishi Electric Automation has been integrated with safety features of CC-Link IE Field, an open, 1-gigabit industrial Ethernet automation network, facilitating industrial communication.

Mazak Variaxis i-300 Simultaneous Five-Axis Machining Centre (VMC) includes a high-capacity auto work changer for flexibility and efficiency. Designed for automated small- to medium-size part-processing operations, the VMC is suited for machining aluminium and other nonferrous metals for various industries, including aerospace, medical and automotive.

Marposs Corporation has launched a maintenance, repair and overhaul inspection and tooling solution, the i-Wave2 Handheld Gage, designed primarily for easy usage. With its 4.57 cm colour display and wireless bluetooth technology, users are able to obtain measurements without the aid of a computer.

Kasto’s sawing system for additively manufactured parts, the KastoWin AMC, is an automatic band saw designed for individual offcuts of additively manufactured components. The saw’s 180 deg turning device rotates workpieces, decreasing wear on the saw blade.

igus R4.1L Series Of Enclosed Energy Tubes For applications in metalworking where energy tubes come into contact with hot chips, motion plastics specialist igus.

Hoffman Group Garant Disc Brushes The Hoffmann Group has designed its new Garant disc brushes for precise deburring, edge filleting and surface finishing of milled, flat precision parts.

GF Machining Solutions: Form P 350 Die Sinking Electrical Discharge Machining features and integrated technologies said to enhance productivity and profitability.

The DMP 500/2SP is Doosan Machine Tools’ latest addition to its existing line of vertical machining centres. Compared to single-spindle machining centres, this model has two spindles and two automatic toolchangers(ATCs). The system effectively doubles productivity by machining two parts simultaneously, reducing work loading, unloading and idle times.

Big Kaiser Base Master Red And Base Master Mini Machine Tool Sensors The Base Master Red and Base Master Mini, introduced by Big Kaiser, are part of the Base Master family of sensors.

Walter’s Tool Life app is for visualising and analysing tool data. The browser-based user interface can be called up universally via the intranet network of the relevant customer. The user interface has improved menu navigation handling, while a newly structured database in the background enhances performance. The app does not need a code to identify the tools for the system. This means that users benefit from multi-device functionality and flexible working.

The Groovex GrooVical by Vargus has now grown to feature grooving and turning applications, in the form of a new close to shoulder positive rake grooving insert Vargus GROOVEX GrooVical Rake Grooving

Star SU Samputensili SG 160 Sky Grind Dry-Grinding Machine The Samputensili SG 160 Sky Grind dry-grinding machine by Star SU is designed to grind gears without using coolant.

Starrag’s Droop+Rein FOGS Heavy Duty high gantry machine has an X-axis of 3,000 to 31,000 mm; a Y-axis of 3,000 to 6,000 mm and a Z-axis of 1,500 to 2,500 mm.

Num’s Flexium+ CNC platform is a tool management system at for manufacturers operating multiple CNC machine tools. It is suitable for complex high-end milling applications, as well as HSM applications in the mould and die market.

The NextSense Osiris Hot Measuring System is an optical measurement instrument used primarily for profile measurement and surface inspection, suited for use in the rail manufacturing sector.

The complete line series by MöllerWerke is a system for protective machinery cover system on milling machines in stand-mounted versions. Complete line protective machinery cover system are often protected by covers on the right and left sides and on the…

Kapp Niles KX 260 Dynamic generating gear grinding machine’s concept makes it possible to minimise the auxiliary process times and to reduce set-up times.

J D Neuhaus Mini Series Air Hoists integrated near field communication sensor and service app, Mini 500 has a 20% increase over speeds achieved by the previous model.

Hoffmann’s Garant Tool24 PickOne enables stock monitoring of classic C-items, such as index able inserts, grinding wheels and protective gloves.

Heller’s HF Series 5-axis machining centres comprise the HF 3500 and HF 5500 models. The main target groups for this new machine concept are the automotive industry, its suppliers and the general machine building industry.

Georg: Ultraturn T is an extra-large turning centre for turbines design with integrated drilling and milling unit, an automatic turbine measuring system.

Faro Design ScanArm 2.0 has a FaroBlu laser line probe HD that incorporates advanced blue laser technology and rapid scanning of up to 600,000 points per second.

CAD Data Exchange Software conversion tools Datakit’s new version of CrossManager, CrossCad/Plg and CrossCad/Ware adds several improvements to Datakit’s interfaces. These applications can now read new versions of CAD formats: SOLIDWORKS 2018, NX 12 and DWG 2018.

Amba’s “All-in-one” machine allows for the production of upset bolt blanks of 60 to 200 mm in length at a rate of up to 400 bolts per minute or 24,000 pieces per hour. In contrast, bolts in lengths between 160 and 180 mm are typically produced at a rate of 60 pieces per minute.

The Radan 2018 R1 will focus on CAD/CAM and Industry 4.0, and includes a number of items with new functionality. An example of this is Radmanager. The system now accepts feedback from the shop floor regarding the cutting progress. This…

OSG’s ceramic end mill series is for high-speed machining at high temperatures in difficult-to-machine materials such as Inconel 718. Two types of ceramic end mills are included in the series—the CM-RMS peripheral cutting edge type and CM-CRE end cutting edge…

The 2SP-2500H lathe by Okuma integrates two lathes into one unit with a standard loader for continuous front and back work.

Makino’s EDF sinker machines now come in a new design with feed rates up to 5,000 mm per min in the X and Y axis.

LVD: Electra FL 3015 Fibre Laser Cutting Machine eight kW fibre laser cutting machine can maintain two G acceleration speed while cutting.

The EOS IPCM M Pro Material Handling Module for the company’s additive manufacturing (AM) printers. It is equipped with a process chamber door with coupling points to connect with the module and material containers.

Creaform’s SmartDent 3D is a non-destructive testing system for 3D assessments of dent damages located on aircraft surfaces, and includes a HandyScan 3D scanner and SmartDent 3D surface inspection software.

Chiron’s double-spindle machining centre DZ08 FX has a maximum torque of 7 Nm at a power of 14 kW and reaches a speed of up to 40,000 rpm with a run-up time of 1.9 seconds. The dynamics are demonstrated by an acceleration of 10 m per s2 in the X axis, 17 m per s2 in the Y axis, and 20 m per sq in the Z axis.

Cheto’s SiC machine can perform machining with five sides with a maximum angle of -25 deg/+25 deg. The kinematics allows the machining of five sides with one setup and a working angle of -90 deg/+45 deg.

The InterCoat ChemGuard corrosion protection by ChemCoaters uses a type of coating technology that reacts with zinc to form a permanent, covalent bond on the surface of the metal for corrosion protection on galvanised steel.

The Mag 20/2 tool magazine by CFT Rizzardi contains 320 tools in small sizes of 1,200 x 1,200 mm with 2,250 mm heights, positioned on two storage plates each with 160 tools. The capacity can be further increased by using additional magazine plates with 160 tools in each case.

CamInstructor has new online CNC programming training courses for manufacturers. The course offerings are designed for people new to CNC machine tool programming as well as for more experienced programmers who may need a refresher or get up to speed on the latest software release.

The WM 250-8000 whirling machine from Burgsmuller allows for +/- seven micrometres pitch diameter tolerance during the hard whirling of ball screw spindles over the entire machining length. A third prism-jaw self-centring steady rest with user-selectable position serves to fix…

The EWE digital boring head can connect to Big Kaiser’s smartphone and tablet app. The app helps operators determine optimal cutting parameters for their tool assemblies, and displays changes in cutting diameters. It also logs the tool adjustment history for future reference.

Anca’s FCP4 Drill Grinder can produce drills from 0.8 to 4 mm on a single machine. From a high speed steel blank, the machine grinds the flute, relief and point producing a finished drill. It has grinding and dressing operations with the company’s Motion CNC and drive technology. The flute shape is adjusted by CNC and form dressed on the machine.

The Universal Robots UR3 robot is a compact lightweight 11 kg table-top robot with a payload of 3 kg, equipped with 360-degree rotatable wrist joints and an infinitely rotatable end joint.

Tailift’s Elektro Servo ES23 is a punching press that features higher speed and precision while being energy-saving.

Seco has released three insert grades TP2501, TP1501 and TP0501, for steel turning with Duratomic coating technology to provide improved toughness, heat resistance and chemical inertness. This lengthens tool life and offers the potential for higher cutting speeds.

Schuler: Monoblock Servo Press has released the MSD-400, a servo press with a force of 400 metric tonnes that increases flexibility and efficiency of manufacturing, and hence productivity.

Sandvik Coromant insert has introduced the GC4305, an insert for steel turning to maximise metal removal rates, shorten processing times and enable good component quality. It offers high cutting data, an ability to withstand high temperatures, and has a wear-resistant Inveio coating to achieve long tool life. The insert can also be used for dry machining.

PTC & Stratasys: 3D CAD Software is an integrated workflow developed by PTC and Stratasys, in a joint effort to enable users a seamless workflow from design to 3D print.

Perceptron has released the SMART3D, a portable laser scanning system for reverse engineering and modelling sectors. It offers a fully integrated automatic rotary table that allows for full 360 deg real-time scanning of parts without the need for targets or best fit alignment, a scanning volume of 200 mm x 225 mm x 225 mm, and an ‘Auto Rescan’ feature.

NCG CAM Solutions Limited have released the NCG CAM v14 software bearing new features such as 5-axis along curve machining, UV surface machining to generate machining passes, tools to align 3+2 axis boundary planes. It has an ability to cover pockets, change the background colour or translucency of all surfaces.

Kennametal has launched a universal hydraulic chuck, the HydroForce HT, which can maximise high-torque performance in all rotating applications.

Kemper has added the MaxiFil Clean, a system with cleanable filter, to its line of mobile extraction and filter units.

The DT-1 Drill/Tap centre from HAAS Automation is now available with a 20,000 revolutions
per minute (rpm) inline direct-drive spindle that enables users to run higher feedrates for small tools and high speed machining operations.

The FARO CAM2 Measure 10.5 is a software developed for the FaroArm, FARO Laser ScanArm and FARO Laser Tracker.

Widia has developed a universal, high-precision collet chuck offering use in multiple applications (milling, drilling, reaming, and tapping), while maintaining runout accuracies of 0.003 mm at 3xD.

The Tsugami S206II with IMG 400LS laser cutting system combines six-axis Swiss machining with laser cutting on one machine, allowing manufacturers to perform both operations with a single setup.

Walter has developed the DC170 and is offering the first two models in dimensions 16xDc and 20xDc. The drill offers more process reliability, stability, running smoothness and efficiency than carbide drills with traditional geometries.

Sutton Tools has extended its Black Magic Family of Tap range that enables component manufacturers to achieve productivity while minimising tap inventory.

Studer has developed the S131 and S151 grinding machines, following the success they had with the S141.

The vibration damper from Sandvik Coromant helps to maintain stable production during deep hole machining operations. Using the machine control adjustment unit, the device allows operators to step away from the machine and manage process modification without hand tools or the risk of personal injury.

GOM Measurement And Evaluation Software has developed the V8 version of its measurement and evaluation software, GOM Inspect Professional. One of the functions enables the tracking of movements and deviations in real time. The live module allows Atos 3D scanners to trace single points as well as complete component geometries in space.

Iscar has developed the SpinJet, a coolant driven high-speed spindle.

The Aicon Automated Scanning In Production stereoScan white light scanner can capture minimal deviations and delicate structures with high accuracy (<0.1 mm). In contrast to a coordinate measuring machine which touches single points, the scanner captures the entire surface of the component.

The igus CF27.D Chainflex Cables series by igus have a minimum bend radius of 7.5 times the cable diametre, and are suitable for use in small installation spaces and dynamic applications, for example in gantries.

Witte Modular Clamping Chucks, available in dimensions of 200 x 300 mm, 300 x 400 mm and 400 x 600 mm, allows an expansion of the clamping surface in two directions. When using larger single or several individual plates, corresponding formats up to the multiple of the initial chuck are possible.

Open Mind’s hyperMill virtual machining software generates a bi-directional communication link between the machine control and the software for process control and optimisation. This allows for virtual mapping of the actual processes so that machining operations can be evaluated, checked and optimised before running the job.

Mitsubishi Material’s MPS1 drill series has been expanded with the addition of a long type, from 10 up to 40xD lengths with optimised curved cutting edges for improved penetration at the depths. The cutting edges and Z-thinning point geometry requires lower thrust. Mitsubishi Materials: MPS1 Drill 10 & 40xD Flute Length

Mastercam’s latest version of its CAD/CAM software features dynamic motion toolpaths that maximises safe engagement and can reduce cycle times by 25 to 75 percent.

The DoveLock Quick Change Jaw System from Kurt is reversible, and allows milling into the changeable jaw plates using the full volume of jaw material. It also gives allows for the machining of multiple steps on the same pair of jaw plates. By rotating the jaw plates and machining different steps on both sides, fewer jaw plates are required for those jobs requiring different steps.

The automatic swing-frame KastoMicut A 2.6 band saw is designed for cutting tubes, sections and solid materials to length and for mitre cutting. Its cutting range extends to 260 mm for round stock and 310 x 260 mm for flat stock. Mitre cuts are possible on both sides from -45 to +60 degrees. The mitre angle is continuously adjustable, as is the cutting speed, which can be set from 20 to 110 m per minute.

The hydrostatic centre spindles from Hyprostatik take radial and axial forces as well as tilt torque, also usable as work head, allowing parts to be worked from both sides or as hollow tailstock for grinding shafts outside and inside.