skip to Main Content
Pulsed Micro Arc Welding for Coil Terminations Increases Line Throughput

Pulsed Micro Arc Welding for Coil Terminations Increases Line Throughput

Pulsed Micro Arc Welding for Coil Terminations Increases Line Throughput

Coils with multiple termination points can be welded at one automation station. Article by James Tod, Amada Miyachi UK.

Pulse micro arc welding is a good choice for coil termination applications, especially as coils are getting smaller and smaller. Other processes do not lend themselves as well for these applications. For example, it can be difficult for lasers to target the pins, while resistance welding is not practical due to electrode size, and soldering involves potentially hazardous fluxes. Multiple output pulsed arc welders are available that offer great automation layout flexibility and increase production line throughput.

Pulse Micro Arc Welding Basics

Pulse micro arc welding is a zero-contact process in which an electrical arc is struck between an electrode and target component. The arc generates very high and concentrated energy density, which results in high local temperatures that can be used for welding. Sophisticated closed loop power supplies are used to establish and maintain the arc under precisely controlled electrical conditions.

The micro arc coil termination process requires wire to be wound onto the pin in a uniform fashion and density. The welding process is accomplished by heating the pin and encapsulating the wire in the molten pin material. The wound pin is positioned close to a welding electrode and an arc struck between the pin and the electrode.

Operators profile the energy and current within the arc in terms of rate of rise, period of peak, and downward cooling to control the rate at which the pin begins to melt back. The process of melting the pin back creates a molten ball that causes the wire and its insulation to melt simultaneously, thus welding the wire to the pin.

Material Type is Critical to the Process

With micro arc welding, the materials must flow together based on the heat generated by the welding arc and the surface tension of the materials. Any contamination can cause the materials to fail to fuse with one another.

Wire insulation is critical because it must be broken down by the heat in the weld before the materials can fuse with one another. In the process, the pin is heated directly and the wire indirectly; if the wire insulation remains intact during the weld, the pin will be melted but the wire will not. Pulsed micro arc termination welding works best with wire insulation rated for temperatures of 180 deg C or lower.

To continue reading this article, head on over to our Ebook!

For other exclusive articles, visit


Check these articles out:

Advantages of Collaborative Development

NASA Develops New 3D Printing Method For Producing Rocket Engine Nozzles

AMADA WELD TECH Announces New Company Name

3D Metalforge Partners Ultimaker to Launch SEA’s Largest Industrial FFF Print Facility In Singapore

Cutting Costs, While Saving The Planet For Tool Makers

LVD Launches New Large-Format Laser Cutting Machine



FOLLOW US ON: LinkedIn, Facebook, Twitter


‘Silver’ Welders to Surf the Industrial 4.0 Wave with Collaborative Robots
Laser Welding Processes for Martensitic Chromium Steels Ensure a Future Safe from Collisions
Back To Top