skip to Main Content
The iJaw fits on any lathe chuck with a suitable standard interface. The picture shows the iJaw on Röhm’s power chuck Duro-A RC with the jaws quick- change system.

The iJaw fits on any lathe chuck with a suitable standard interface. The picture shows the iJaw on Röhm’s power chuck Duro-A RC with the jaws quick- change system.

Röhm’s IoT Solution For Real-Time Measurement Of Clamping Force

On 30 September 2021, the clamping technology specialist Röhm presented the iJaw clamping jaw for the first time at EMO 2021 in Milan. It allows the clamping force to be measured in real-time when machining. Röhm thus solves a problem that has no accepted industrial solution up to now. The clamping force is usually set by the operator of the machine tool which is based on experience. Errors during machining due to incorrect clamping force or workpiece loss are therefore preprogrammed.

The iJaw presented by Röhm integrates sensor technology for clamping force measurement as well as wireless data transmission in a full-fledged clamping jaw. The measurement takes place directly at the clamping point to the workpiece; the data transmission to a gateway makes use of the upcoming industry-standard IO-Link Wireless. The gateway can be connected to the machine control system via the integrated Profinet interface and/or sends the data to a cloud via the integrated LAN interface.

Secured Clamping With iJaw >> https://bit.ly/3iEMhgR

What You Missed:
ABB Technology To Automate New Bioplastics Plant In Thailand
J.P. Morgan Answers To Key Investor Questions On The Russia-Ukraine Conflict
Making The Shift To A Greener World With Sandvik Coromant
Celebrating 50 years Of Excellence In Cutting Tool Manufacture
Everything You Need To Know About Spindles
AirAsia Ride To Launch In Thailand Next Month
Ukraine Conflict Opens Diplomatic And Energy Opportunities For Qatar

WANT MORE INSIDER NEWS? SUBSCRIBE TO OUR DIGITAL MAGAZINE NOW!

Letter to the Editor
Do you have an opinion about this story? Do you have some thoughts you’d like to share with our readers? APMEN News would love to hear from you!

Email your letter to the Editorial Team at [email protected]
Paul Horn’s All-Rounder For Slot Cutting And Groove Milling
Block Busters
Back To Top